Ihe ntinye igwe Tungsten Carbide dị n'elu maka Aluminom ingots Machining Featured Image

Ihe ntinye igwe Tungsten Carbide dị n'elu maka igwe ingots aluminom

Nkọwa dị mkpirikpi:

Njikwa nha nke ọma
— Imezu ihe achọrọ, na-ahụta nkenke na izi ezi.

Isi Ike dị elu na Nguzogide mgbaji
-Ịhụ nkwụsi ike na ntụkwasị obi.

Usoro ịgbanye ọkụ Isostatic Pressing (HIP).
- Ihe dị n'otu n'otu, nwere nka dị elu.

Nrụpụta akpaaka dị elu
- Ọdịmma na-agbanwe agbanwe, arụ ọrụ emelitere nke ukwuu.

Nkwado maka nkọwapụta dị iche iche na nhọrọ nhazi
- Na-egbo mkpa dị iche iche, na-enye ọtụtụ nhọrọ.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwa

Ihu igwe-egwe ọka maka Aluminom Ingot

Nchịkọta ngwaahịa:
Emebere igwe ihe igwe igwe ihu igwe ingot maka igwe igwe n'elu tupu mpịakọta ọkụ
usoro nke aluminum ingots. The aluminum ihe onwunwe ihu egwe ọka cutter usoro na-agụnye ike ike
ndị na-egwe ọka, ndị na-egwe ọka nkenke, na ndị na-egbu ihe egwe ọka.
A na-eji nnukwu igwe-egwe ọka nke oghere siri ike. A na-eji onye na-egwe ọka ziri ezi mee ka ọ dịkwuo mma.
elu ire ụtọ nke aluminum ingots.The ntekwasa egwe ọka cutter enhances eyi nguzogide na ndụ nke agụba.

Njirimara ngwaahịa:
1, The-egwe ọka ọnụ bụ nkọ, n'ihi na a ezigbo elu na milled aluminum ingot, na ezi.
nhazi nkwụsi ike.
2, The agụba nwere elu njupụta na kwụsie ike, àjà magburu onwe mmetụta eguzogide na eyi iguzogide.3, The agụba elu nwere ezigbo ire ụtọ, huu a na-abụghị nrapado na-abụghị ọkụ-egwe ọka usoro.

Onye na-egbu nri siri ike:

Koodu iwu	Akụkụ (mm
Koodu iwu	L	R	d	S	s1
JT6206-L	37.4	3	7	8	2

Koodu iwu	Akụkụ (mm)
Koodu iwu	L	R	S	S1	S2	d	d1
JT6206-M	30	3	8	2.4	0.65	8.2	7.2

Mechaa cutter Milling:

Koodu iwu	Akụkụ (mm)
Koodu iwu	L	L1	R	R1	S	S1	d
JT6027	37.4	37.08	3	730	8	2	7.4

Cutter Milling mkpuchi:

Ndepụta ọkwa

Ọkwa	Koodu ISO	Njirimara arụrụ arụ (≥)			Ngwa
Ọkwa	Koodu ISO	Njupụta g/cm3	Isi ike (HRA)	TRS N/mm2	Ngwa
YG3X	K05	15.0-15.4	≥91.5	≥1180	Kwesịrị ekwesị maka ịrụ ọrụ nkenke nke nkedo na ọla ndị na-abụghị ígwè.
YG3	K05	15.0-15.4	≥90.5	≥1180
YG6X	K10	14.8-15.1	≥91	≥1420	Kwesịrị ekwesị maka nhazi nkenke na ọkara nke imecha nkedo nkedo na ọla ndị na-abụghị ígwè, yana maka nhazi nke manganese ígwè na ígwè emenyụ.
YG6A	K10	14.7-15.1	≥91.5	≥1370
YG6	K20	14.7-15.1	≥89.5	≥1520	Kwesịrị ekwesị maka ịmecha ihe nkedo na nke siri ike nke nkedo na ihe ọkụ ọkụ, a pụkwara iji ya mee ihe na-eme ka ọkpụkpụ na-eme ka ọkpụkpụ na-arụ ọrụ na-arụ ọrụ siri ike.
YG8N	K20	14.5-14.9	≥89.5	≥1500
YG8	K20	14.6-14.9	≥89	≥1670
YG8C	K30	14.5-14.9	≥88	≥1710	Kwesịrị ekwesị maka inlaying rotary mmetụta mkpọpu nkume na rotary mmetụta egwu egwu bits.
YG11C	K40	14.0-14.4	≥86.5	≥2060	Kwesịrị ekwesị maka ịgbanye ibe n'ibe ezé chisel ma ọ bụ conical maka igwe na-egwu egwu nkume dị arọ iji lụso usoro nkume siri ike ọgụ.
YG15	K30	13.9-14.2	≥86.5	≥2020	Kwesịrị ekwesị maka ule nkwụsị nke ígwè ígwè na ọkpọkọ ígwè n'okpuru oke mkpakọ.
YG20	K30	13.4-13.8	≥85	≥2450	Kwesịrị ekwesị maka ịme stamping anwụ.
YG20C	K40	13.4-13.8	≥82	≥2260	Kwesịrị ekwesị maka ịme stampụ oyi na ịpị oyi na-anwụ anwụ maka ụlọ ọrụ dịka akụkụ ọkọlọtọ, bearings, ngwaọrụ, wdg.
YW1	M10	12.7-13.5	≥91.5	≥1180	Kwesịrị ekwesị maka nhazi nkenke na ọkara-emecha nke igwe anaghị agba nchara na nchara alloy n'ozuzu.
YW2	M20	12.5-13.2	≥90.5	≥1350	Kwesịrị ekwesị maka ọkara-emecha nke igwe anaghị agba nchara na obere alloy ígwè.
YS8	M05	13.9-14.2	≥92.5	≥1620	Kwesịrị ekwesị maka nhazi nkenke nke ígwè dabeere na ígwè, nickel dabeere na elu okpomọkụ alloys, na ígwè dị elu.
YT5	P30	12.5-13.2	≥89.5	≥1430	Kwesịrị ekwesị maka ịkpụ ọrụ dị arọ nke ígwè na nkedo ígwè.
YT15	P10	11.1-11.6	≥91	≥1180	Kwesịrị ekwesị maka ịrụ ọrụ nkenke na ọkara nke nchara na nkedo.
YT14	P20	11.2-11.8	≥90.5	≥1270	Kwesịrị ekwesị maka ịrụ ọrụ nkenke na ọkara imecha ígwè na nkedo, yana ọnụego nri na-agafeghị oke.Emebere YS25 nke ọma maka ịrụ ọrụ igwe igwe na nchara na nkedo.
YC45	P40/P50	12.5-12.9	≥90	≥2000	Kwesịrị ekwesị maka ngwá ọrụ ịcha ihe dị arọ, na-enye nsonaazụ dị mma na ntụgharị siri ike nke nkedo na nchara dị iche iche.
YK20	K20	14.3-14.6	≥86	≥2250	Kwesịrị ekwesị maka igbanye mmetụta rotary mmetụta mgbawa nkume na mkpọpu n'ụdị nkume siri ike na nke siri ike.